Capacity:

Thickness: 1/4″ x 8″
Width: 2 1/4″ x 15″
Length: (minimum self feed) 72″
Weight: 16,100 lbs

Controls:

Switches located in both infeed and outfeed roll stands
Right sidehead control station

Horsepower:

Top: (2) 50 (Standard)
Bottom: 50 (Standard)
Left Side: 50 (Standard)
Right Side: 35 (Standard)

Standard:

Other Standard Equipments:

Split sectional type infeed rolls
Kwik release/reset of pressure bar
Kwik release/reset of left sidehead
Combined bed plate and lower infeed roll adjustment
Motor starting enclosure
Electrically interlocked safety guards

Feed system:

Mechanical

200-700 fpm
Helical gear driven rolls interconnected by chain and sprocket with an automatic lubricator
12″ feed rolls
40 HP, 1200 RPM drive motor with reversing starter and sheaves for (1) fixed feed speed

Cutterheads:

Up to 14 knives per head
Top and bottom head – one piece alloy
8 1/8″ cutting circle
3600 RPM
Mechanically interlocked brakes
Sideheads arranged for a maximum 8″ cutting circle with maximum 9 5/8″ swing

Optional Equipment:

Carbide spiral cutterheads
Sidehead cutterheads
Chrome, nickel, or carbide wear parts
Power hoists for infeed and outfeed rolls
Power hoist for top head
Hydraulic roll tensioning
Air release chipbreaker
Double profiles
Feed reduction unit for 75-400 fpm
Free standing operator’s console
Roller knife setting gauge
AC variable speed frequency drive

Construction:

Cast blade with heavy internal cross members
All major components are cast

Capacity:

Thickness: 1/2″ x 6″
Width: 2 ¼” – 15″
Length: (minimum self feed) 90″ (59″ w/mid roll)
Weight: 25,000 lbs. (6 roll machine)

Controls:

Free standing operator’s console
Pendant control station
Guide sidehead control station

Horsepower:

Top: 100
Bottom: 75
Out Side: 50
Guide Side: 40

Standard:

Other Standard Equipments:

Chipbreakers – air tensioned/released
LCD digital readout – top head, bed plate, bottom head, and lower feed rolls
Pneumatic sidehead hold-over roll and infeed hold-over guide
Built-in top and bottom jointers with “safe stone advance”
Detachable sidehead jointers
Hydraulic top and bottom head lock
Top and bottom dust hoods
Electrically interlocked safety guards with easy access
Quick-release pressure bar and outside head
Electrical panel
Automated bottom head traverse
Automated top head hoist
CE certified

Feed system:

Mechanical

Electric or hydraulic drive
Maximum feed speed – up to 1000 FPM
14″ feed rolls
Upper rolls hydraulically positioned and tensioned
All feed rolls reversible, interchangeable

Cutterheads:

All cutterheads – 10 ¼” diameter cutting circles
Up to 16 knives/head (20 knives optional)
“Dura-Change” heads

Optional Equipment:

8″ thickness capacity
24″ width capacity
Spiral carbide cutterheads
Hydraulic pressure bar control
Sidehead cutterheads and tooling
Automated setworks – top head and outside head
Double profile
Water cooled main guide
Programmable controller
Alternative voltage to 460 standard
Powered mid roll assembly
Frequency inverters to increase spindle speeds
Complete lumber infeed/outfeed equipment
Larger horsepower cutterhead motors
Left hand guide registration

Construction:

Steel fabricated frame
Thermally stress relieved

Capacity:

Thickness: 1/2″ X 6″
Width: 2 1/2 X 13
Length: (minimum self feed) 95″
Weight: 34,000 lbs.

Controls:

Pendant control station
Right sidehead control station

Horsepower:

Top: 150 (Standard) 200 (Optional)
Bottom: 100 (Standard) 125/150 (Optional)
Outside: 75 (Standard) 100 (Optional)
Guide Side: 75 (Standard) 100 (Optional)

Standard:

Other Standard Equipments:

Steel sub-frame
Siko counters for bed plate, and lower feed roll adjustment
Motorized top head hoist
16 knife top and bottom cutterheads
Reversible feed rolls
Chipbreaker – air tensioned/released
Pneumatic sidehead chipbreaker and infeed hold-over shoe
Built-in “safe stone advance” jointers
Hydraulic top head lock
Hydraulic bottom head lock
Top and bottom dust hoods
Electrically interlocked safety guards
Quick-release left sidehead
Digital positioners – top head and left sidehead
Oil injection lubrication system for cutterhead bearings
Programmable controller

Feed system:

Mechanical

2000 fpm (various speed ranges to 2000 fpm)
Hydraulic or electric drive
16″ feed rolls – individual motors
Upper rolls hydraulically positioned and tensioned
All feed rolls reversible, interchangeable
High speed opening and re-setting for upper feed rolls
Water cooled main guide

Cutterheads:

Up to 32 knives/head
Top and bottom heads – one piece alloy
Steel, double journal mount (standard)
“Dura-change” (standard) Hydro-lok-optional

Optional Equipment:

Sidehead cutterheads– standard or hydro-lok
Automatic setworks – top and left sidehead
Complete lumber infeed/outfeed equipment
Plunge type sidehead jointers
Guide bar cooling unit
Mid-roll option for feeding 6’ lumber
Double profile
8″ thickness
Water cooled bed plate
Panel View operator’s station

Construction:

Heavy steel fabricated frame
Thermally stress-relieved
Modular construction